36
CONNECTING THE GAS HOSE
To attach the quick connection gas hose
to your Arc pull the collar back on the
connector and place the hose onto the
gas inlet. When you release the collar
it should return to its original position
freely. This connection must be tested
for leaks before using the oven (see
page 38).
Inspect the hose before each use of
the appliance. Every 5 years, or if there
is evidence of abrasion, wear, cuts,
or leaks, the hose and regulator must
be replaced with Gozney approved
products prior to the appliance being
put into operation. For more details visit
the Gozney website: .gozney.com.
Keep the gas hose away from any heated
surface(s).
Arc and Arc XL Technical Document AU.indd 36 07/11/2023 16:28:45
To Next Page
Loading...
