46
Maintenance
CLEANING THE VENTURI
If your burner’s fl ame is overly yellow or
making more noise than usual you may
have debris blocking the venturi. When
the oven is turned off, disconnect it from
the gas and let it cool. Make sure Arc
is on a soft surface that won't cause
scratches before gently rolling it onto its
side. Use the torx screwdriver provided
to loosen the 8 screws and remove the
bottom panel. Use a vacuum cleaner
with a long plastic nose to remove any
debris. It’s good practice to check the
inside of the dock for debris regularly.
Venturi
We recommend you check over
your oven to see if it requires any
maintenance work before each use,
failure to check parts for safe operation
could result in malfunction or injury. For
any replacement parts or assistance
please contact inquiries@gozney.com.
Arc and Arc XL Technical Document AU.indd 46 07/11/2023 16:28:47
To Next Page
Loading...
