11
devices on the map, click the icon of the device to see the details including
latitude & longtitude, speed, altitude, time, ACC status, door status, and
alarm status, etc. and you can click “Navigate” to navigate you to that car.
2. Select the device: Click “≡” at the upper left corner to select a device, Then
its position, Geo-fence and trace (need to configure the “continuously
track” settings of the “Control” page) will be showed on the map.
5.6.5 Control
After selected the device, then click “Control” to enter control page to use function of
single track, continuously track, Arm / Disarm and Geo-fence, etc.
To Next Page
Loading...
