Graco GrindLazer 480 User Manual

3A0101F
EN
Operation
GrindLazer
™
Designed to grind flat, horizontal concrete or asphalt surfaces. For removal of materials
from concrete and asphalt surfaces. For professional outdoor use only
Model 571002 - Forward cut
GrindLazer 270 (270 cc / 9 hp)
Model 571003 - Forward cut
GrindLazer 390 (390 cc / 13 hp)
Model 571004 - Reverse up-cut (Must be used with LineDriver
™
)
GrindLazer 480 (480cc / 16 hp)
Model 571260 - Reverse up-cut (Must be used with LineDriver
™
)
GrindLazer 630 (627 cc / 21 hp)
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and instructions in this
manual. Save these instructions.
ti14752a
ti14763a
GrindLazer 270 and 390
GrindLazer 630
(Drums, cutters, and LineDriver
™
sold separately)
Related Manuals:
Repair - 3A0102
Parts - 3A0103
ti25371a

Graco GrindLazer 480 Specifications

General

Brand	Graco
Model	GrindLazer 480
Category	Construction Equipment
Language	English

Summary

Safety Information

Important Safety Instructions

General guidance and overview of critical safety instructions for the GrindLazer.

Specific Hazard Warnings

Details on hazards including dust, equipment misuse, moving vehicles, parts, and burns.

Fire, CO, PPE, and Prop 65 Warnings

Covers fire/explosion, carbon monoxide, personal protective equipment, and California Proposition 65.

Operation and Start-Up

Pre-Start Checks

Essential checks and inspections before starting the engine.

Drum Installation and Replacement

Drum Installation Procedure

Drum Removal Procedure

Engine Starting Procedures

Pre-Start Engine Checks

Engine Start Sequence

Steps for starting the engine, including fuel valve, choke, power switch, and throttle.

Cutting Operation

Preparation for Cutting

Engaging Drum and Setting Depth

Procedure for lowering the drum and adjusting cutting depth for material removal.

Depth and Alignment Adjustments

Depth Control Wheel Setup

Rear Axle Adjustment

Procedure for adjusting the rear axle to correct uneven cut depth.

Maintenance Schedule and Procedures

Pre-Operation Checks

Periodic Maintenance Intervals

Graco Standard Warranty

Warranty Coverage and Exclusions

Details on Graco's warranty terms, limitations, and exclusions for equipment.

Warranty Claim Procedure

Instructions for returning defective equipment and verifying claims.