Graco GrindLazer 270 User Manual

3A0101F
EN
Operation
GrindLazer
™
Designed to grind flat, horizontal concrete or asphalt surfaces. For removal of materials
from concrete and asphalt surfaces. For professional outdoor use only
Model 571002 - Forward cut
GrindLazer 270 (270 cc / 9 hp)
Model 571003 - Forward cut
GrindLazer 390 (390 cc / 13 hp)
Model 571004 - Reverse up-cut (Must be used with LineDriver
™
)
GrindLazer 480 (480cc / 16 hp)
Model 571260 - Reverse up-cut (Must be used with LineDriver
™
)
GrindLazer 630 (627 cc / 21 hp)
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and instructions in this
manual. Save these instructions.
ti14752a
ti14763a
GrindLazer 270 and 390
GrindLazer 630
(Drums, cutters, and LineDriver
™
sold separately)
Related Manuals:
Repair - 3A0102
Parts - 3A0103
ti25371a

Graco GrindLazer 270 Specifications

General

Engine	Honda GX270
Cutting Width	10 in
Blade Type	Diamond blade
Travel Speed	Up to 2.5 mph
Engine Power	9.0 HP

Summary

General Safety Warnings

Dust and Debris Hazard

Hazards related to dust and chemicals released from materials during grinding.

Equipment Misuse Hazard

Risks of serious injury or death due to improper operation, maintenance, or alteration.

Moving Vehicle Hazard

Moving Parts Hazard

Burn Hazard

Specific Hazard Warnings

Fire and Explosion Hazard

Risks of ignition from flammable fumes, solvents, or materials in the work area.

Carbon Monoxide Hazard

Danger of death from inhaling colorless, odorless carbon monoxide gas.

Personal Protective Equipment

Drum Installation and Replacement

Starting the Engine

Cutting Material

Maintenance Procedures