Graco GrindLazer 270 User Manual

Operation
3A0101F 7
Starting the Engine
3. Engage Rear Wheel Brake (G) to prevent Grin-
dLazer from moving.
4. 480/630 Models Only: Attach LineDriver to
GrindLazer.
5. Push down on handle bars until drum is locked into
UP position.
6. 480/630 Models Only: Make sure Engine Stop
Switch (C) is in UP position.
7. Start Engine:
a. Move fuel valve to open.
b. Move choke to closed.
c. Set Engine Power Switch (B) to ON.
d. Pull starter cord.
e. After engine starts, move choke to open.
f. Set throttle to desired setting.
ti14754a
ti15089a
ti14758a
ti15088a
ti5248a
480 Models270/390 Models
ti15091a
ti5249a
480 Models
270/390 Models
630 Models
ti3315a
ti14872a
270 & 390 Models
480/630 Models
ti5263a
TIA
480 Models270/390 Models
630 Models
ti6483a

Graco GrindLazer 270 Specifications

General

Brand	Graco
Model	GrindLazer 270
Category	Construction Equipment
Language	English