To Next PageTo Next Page
Need help?Do you have a question about the Graco LineLazer ES 500 and is the answer not in the manual?
General| Engine Type | Electric |
|---|---|
| Weight | 69 lbs |
| Flow Rate | 0.5 GPM |
| Number of Guns Supported | 1 |
| Hose Length | 50 ft |
| Max Tip Size | 0.021 in |
| Max Operating Pressure | 3300 PSI |
| Line Width | 4 in to 12 in |
| Operating Pressure | 3300 psi (22.7 MPa) |
Read all warnings and instructions in this manual and related manuals before using the equipment.
Details on different model numbers and compatible DEWALT batteries.
Information on when to use grounding wire and clamp for flammable, oil-based, and water-based materials.
Guidance on grounding pails and ensuring continuity for flammable materials.
Procedure for aligning the front wheel for straight rolling.
Description of the lever operation for PRIME and SPRAY positions.
Procedure to flush factory-installed test material before first use.
Instructions for inserting the spray gun into the gun holder.
Guidance on adjusting the gun's position up/down, forward/reverse, and left/right.
List and diagram of parts specific to the motor module.
List and diagram of parts for the filter manifold assembly.
List and diagram of parts for the gun arm assembly.
