Startup
3A9031A 15
Startup
Prime/Spray Valve
The Prime/Spray Valve uses a lever that is
flipped between the PRIME and SPRAY
position.
SPRAY Position
PRIME Position
Flush Storage Fluid
This striper arrives from the factory with a
small amount of test material in the system.
It is important that you flush this material
from the striper before using it for the first
time.
1. When flushing with flammable
materials, follow Grounding
Instructions, page 9.
2. Follow Cleaning and Flushing Fluid
Compatibility, page 28.
3. Perform Pressure Relief Procedure,
page 10.
4. Make certain ON/OFF switch is OFF.
Power button is NOT illuminated when
OFF.
a. Separate drain tube (smaller) from
siphon tube (larger).
To Next Page
Loading...
