Setup
30 3A2797ZAA
9. Install GX-16 Fitting Adapter Kit
(Models 24N575 and 24N576 Only).
a. Remove the chemical fittings from the back of
the GX-16.
b. Install JIC #4 fitting assembly into the B Supply
port.
c. Install JIC #6 fitting assembly into the B Return
port.
d. Install JIC #8 fitting assembly into both A Sup-
ply and A Return ports.
10. Install Flow Meter Kit (Optional).
Refer to HFR Flow Meter Kits, Instruction-Parts manual
for installation and setup instructions.
11. Install PrePoly Refresh Kit (Optional).
Refer to HFR for NVH Prepoly Refresh Kit, Instruc-
tions-Parts for installation and setup instructions.
To Next Page
Loading...
