Cleanup
3A4980B 19
Cleanup
Cleaning the gun after every job is important.
Proper care and maintenance results in
optimal spray performance.
Cleaning FlexLiner System
1. Perform Pressure Relief Procedure,
page 8.
2. Disconnect gun from FlexLiner system.
3. Loosen ring (1) from cup (5). Remove
ring (1) and cover (2) from cup. Verify
FlexLiner (4) remains in cup upon
removal of cover and ring.
4. Return excess fluid to original container.
Hold the FlexLiner (4) in place when
pouring.
When cleaning gun with solvents, read all
fire and explosion hazard warnings on
page 4.
NOTICE
Strong solvents, such as lacquer thinner,
can damage parts of the FlexLiner System.
Do NOT immerse parts of the FlexLiner
System in solvent.
To Next Page
Loading...
Need help?
General
