For the application of line striping materials.
For professional use only.
Not approved for use in explosive atmospheres or hazardous locations.
Maximum Operating Pressure: 3300 psi (22.8 MPa, 228 bar)
Important Safety Instructions
Read all warnings and instructions in this manual and in related manuals
before using the equipment. Be familiar with the controls and the proper
usage of the equipment. Save these instructions.
Related Manuals:
ES 1000 ES 2000
311254 Gun 311254 Gun
334599 Pump 310643 Pump
3A3428 Auto-Layout Application Methods
Operation, Repair, Parts
LineLazer
™
ES 1000 / ES 2000
Airless Line Striper
3A4603F
EN
LineLazer ES 2000
LineLazer ES 1000
Use only genuine Graco replacement parts.
The use of non-Graco replacement parts may void warranty.
To Next Page
Need help?
General
