Graco LineLazer IV 3900 - Clutch Housing; Removal

Clutch Housing
311020Y 15
Clutch Housing
Removal
1 Fig. 10. Remove four cap screws (186) and lock washers
(188) which hold clutch housing (85) to engine.
2 Remove screw (177) from under mounting plate (96).
3 Pull off clutch housing (85).
Installation
1 Fig. 10. Push on clutch housing (5).
2 Install four cap screws (186) and lock-washers (188) and
secure clutch housing (85) to engine. Torque to 200 in-lb
(22.6 N·m).
ti6643a
88
85
188 186
96
177
Fig. 10