Graco LineLazer IV 5900 - Page 13

Startup
311017A 13
SwitchTip and Guard Assembly
6 Place siphon tube in paint
pail.
7 Trigger gun again into
flushing fluid pail until
paint appears. Assemble
tip and guard.
1 Engage trigger safety.
Use end of SwitchTip (A)
to press OneSeal (B) into
tip guard (D), with curve
matching tip bore (C).
2 Insert SwitchTip in tip
bore and firmly thread
assembly onto gun.
PAINT
ti3316a
ti3322a
FLUSH
ti3324a
WLD
A
B
C
D
WLD
WLD