Graco LineLazer IV 5900 - Gun Placement and Handling

Digital Tracking System (DTS)
26 311017A
16 Press and hold DTS
button until CLEAR, then
NO ERROR scrolls
across display, and then
error code E=00 displays.
See manual 311020.
Note: To ski p ER ROR
CODE, short press DTS
button to go to step 18.
17 Short press to move to
distance CALibration
display.
18 To calibrate distance meter,
accurately measure out 25
ft or 10 m and move
machine to start point.
While CAL is showing,
press and hold DTS button
until 25 ft or 10 m flashes.
Note: To skip distance
CALibration, short press
DTS button to go to step 21.
19 Move LineLazer exactly
25 ft or 10 m. Do not
back up. Press DTS
button. DONE displays if
calibration was
successful or FAIL
displays if not successful.
WLD
WLD
7,D
5ROOIWRUP
WLD