S
seanryanSep 12, 2025
How to trigger a Graco Paint Sprayer?
- BbaileylewisSep 12, 2025
To trigger the Graco Paint Sprayer, make sure the spray gun trigger safety lever is in the SAFETY OFF position.
To Next PageTo Next PageHow to trigger a Graco Paint Sprayer?
To trigger the Graco Paint Sprayer, make sure the spray gun trigger safety lever is in the SAFETY OFF position.
Why is my Graco Paint Sprayer spraying two thick streams of paint?
If paint is coming out of your Graco Paint Sprayer in two thick streams, make sure the reversible spray tip is not in the UNCLOG position. Rotate the arrow-shaped handle on the spray tip so it points forward in the SPRAY position.
Why is paint coming out of the pressure control switch of my Graco MAGNUM 232738?
If paint is coming out of the pressure control switch on your Graco Paint Sprayer, the pressure control switch is worn and needs replacing.
General| Model | MAGNUM 232738 |
|---|---|
| Type | Airless Paint Sprayer |
| Max Pressure | 3000 PSI |
| Flow Rate | 0.24 GPM |
| Hose Length | 50 ft |
| Power Source | Electric |
| Voltage | 120 V |
| Horsepower | 0.5 HP |
Troubleshooting steps for when the motor fails to start or the pump does not cycle.
Diagnosing issues when the building circuit breaker trips during sprayer operation.
