Setup
14 313034H
Unclogging Spray Tip
To avoid fluid splash-back:
• Never pull gun trigger when arrow-shaped handle is
between SPRAY and UNCLOG positions.
• Tip must be pushed all the way into guard.
1. To UNCLOG tip obstruction,
engage trigger lock.
2. Point arrow-shaped handle
backward to UNCLOG posi-
tion.
3. Aim gun at piece of scrap or
cardboard.
4. Unlock trigger lock. Pull trig-
ger to clear clog.
5. When obstruction is
cleared, engage trigger
lock and rotate
arrow-shaped handle back
to SPRAY position.
Point the arrow-shaped
handle on the spray tip forward to SPRAY and
backward to UNCLOG obstructions.
ti8908a
ti9048a
ti8909a
ti9049a
To Next Page
Loading...
