Graco magnum pro plus a20 Operation Instructions

Pressure Relief Procedure
3A1177B 9
Pressure Relief Procedure
Follow this Pressure Relief Procedure whenever you
stop spraying and before cleaning, checking, servicing,
or transporting equipment.
1. Turn OFF power switch.
2. Place prime tube in waste pail.
3. Turn Prime/Spray valve to PRIME.
4. Turn pressure control knob left (minimum pressure).
5. Trigger gun into bucket to relieve pressure in hose.
ti2018a
ti2034a
ti2019a
ti2020a
ti2033a

Graco magnum pro plus a20 Specifications

General

Brand	Graco
Model	magnum pro plus a20
Category	Paint Sprayer
Language	English