Shutdown and Cleaning
332689D 21
NOTE: Step 12 is for returning paint in hose back to
paint pail. One 50-ft hose holds approximately 1-quart
(1-liter) of paint.
12. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Move Prime/Spray valve to SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger until you see paint
diluted with water starting to come out of gun.
13. While continuing to trigger gun, quickly move gun to
redirect spray into waste pail. Continue triggering
gun into waste pail until water dispensed from gun is
relatively clear.
14. Stop triggering gun. Engage the trigger lock.
15. Turn Prime/Spray valve to PRIME.
16. Turn power switch OFF.
17. Clean InstaClean™ Fluid Filter and gun, page 24.
18. Fill unit with Pump Armor™ storage fluid. Read
Long Term Storage, page 25.
To Next Page
Loading...
Need help?
General
