Graco Mark VII Max User Manual

Pressure Relief Procedure
3A2244A 9
Pressure Relief Procedure
1. Turn power OFF. Wait 5 minutes for power to
dissipate.
2. Lock gun trigger safety.
3. Remove guard and SwitchTip.
4. Turn pressure to lowest setting. Make sure you are
not in E-Control Mode (see Operation manual).
Trigger gun to relieve pressure.
5. Put drain tube in pail. Turn prime valve down to
DRAIN position.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing fluid
and moving parts, follow the Pressure Relief Proce-
dure when you stop spraying and before cleaning,
checking, or servicing the equipment.
ti4265a
ti18199a
ti2769a
ti18247a
ti13669a
ti13670a
ti2595a
ti14842a

Graco Mark VII Max Specifications

General

Brand	Graco
Model	Mark VII Max
Category	Paint Sprayer
Language	English