EasyManua.ls Logo

Graco NAUTILUS SNUGLOCK LX - Forward-Facing Harness Mode; Forward-Facing Harness Mode With Top Tether Use

Graco NAUTILUS SNUGLOCK LX
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
3 Forward
Facing
3-A
Forward-Facing Harness Mode
With Top Tether
Forward-Facing Harness Mode:
10-30 kg (22-65 lb) and 69-125 cm
(27”-49”) at least one year old
Place car seat forward-facing in the vehicle
back seat.
Make sure UAS strap or vehicle seat belt is
routed through the forward-facing belt path
marked with an orange label.
Attach and tighten top tether strap. When
used properly, the top tether helps reduce
injury in a sudden stop or crash.
Install this car seat tightly in your vehicle. Car
seat should not move at the forward-facing
belt path more than 2.5 cm (1”) from side to
side, front to back.
In the forward-facing harness mode, the
armrests MUST be installed.
UAS Strap with Top
Tether Strap
Do not install with
the UAS connectors
for a child weighing
more than 20 kg (45
lb)

Table of Contents

Other manuals for Graco NAUTILUS SNUGLOCK LX

Related product manuals