Graco NAUTILUS SNUGLOCK LX User Manual

52
3 Forward
Facing
Using Without the SnugLock
®
Lock-Off:
5B. Route the Vehicle Seat Belt
Thread vehicle seat belt through the
forward-facing belt path (marked with
an orange label) and out the other side.
Buckle it. The seat belt should lie as flat as
possible and not be twisted.
Review your vehicle’s owner manual for vehicle seat belt use
10A. Replace the Lower Backrest Pad
Move the headrest back to its proper
position for your child.
9A. Close and Lock the SnugLock
®
Lock-Off
When the slack is removed, close and lock
the SnugLock
®
Lock-Off. Make sure both lap
and shoulder belt are under the SnugLock
®
Lock-Off.
Click!
7B. Tighten the Vehicle Seat Belt
Press down firmly on the top of the base
while pulling on the shoulder belt to remove
the slack.
Do not pull on the strap with excessive
force.
After step 7B, continue with step 10 on
the next page.
6B. Lock the Vehicle Seat Belt
In most vehicles today, slowly pull the
shoulder belt all the way out and then let it
go back in. You will hear a clicking sound.
Slowly pull out on the belt and it should
be locked. If not, review your car’s owner
manual and section 7-D.

Graco NAUTILUS SNUGLOCK LX Specifications

General

Brand	Graco
Model	NAUTILUS SNUGLOCK LX
Category	Automobile Accessories
Language	English