Graco NAUTILUS SNUGLOCK LX User Manual

6
1-A Quick Guide to Your Manual
Car Seat Assembly (On Select Models)
(Follow the directions that matches your model)
Attach Headrest
Squeeze height adjust button and push headrest into
slots on the back support as shown. Headrest will
click into the back support.
You may need to unfasten the hook and loop
attachment tape on both sides at the top of the
back support to allow for easier access to the slots.
Always use child restraint with headrest installed
and properly adjusted.
Click!
Adult Assembly Required
This car
seat
is for
children:
Forward-Facing Harness Mode: 10-30 kg (22-65 lb),
69-125 cm (27”-49”)
Highback Booster: 18-45 kg (40-100 lb), 110-145 cm (43”-57”)
Backless Booster: 18-45 kg (40-100 lb), 110-145 cm (43”-57”)
Backless Armless Booster: 18-54 kg (40-120 lb),
110-145 cm (43”-57”)
This seat CANNOT be used rear-facing.

Graco NAUTILUS SNUGLOCK LX Specifications

General

Brand	Graco
Model	NAUTILUS SNUGLOCK LX
Category	Automobile Accessories
Language	English