Graco ProMix Easy Installation

8 309623F
Setup examples for Xtreme Mix
Choices:
Selection: Software Update
and Version Information
Selection: b
Software versions:
Welcome to the Graco Control Application Menu
Build date: Sep 11 2002 08:36:59 (debug build)
a. Software Update and Version Information
b. View Log Files
c. Set Date and Time
d. Enter Calibration Information
e. Enter Pump Size
Enter Selection [a-e]: a
a. Install Control Application Software
b. Display Software Versions
c. Return to Main Menu
Enter Selection [a-c]: b
Boot Code version: 1.01, checksum=c365ac, built:Aug 05 2002 10:31:50
Control Application version: 1.01, checksum=21e90a9, built:Sep 11 2002 08:37:07
Selection: Set Date and Time
Selection: a
Enter month:
Enter day:
Enter year:
Enter Selection [a-e]: c
Current Date 03/01/02. Current Time 12:04.
Note: To fully charge clock battery, power up unit for 4 hours.
a. Set date
b. Set time
c. Return to Main Menu
Enter Selection [a-c]: a
Enter a new month (1-12). Current month 03
09
Enter a new day (1-31). Current day 01
12
Enter a new year (2-50). Current year 02
02
Note: Calibration number is on the
sensor housing label.
Selection: Enter Calibration
Information
Enter A calibration factor:
Enter B calibration factor:
Updated calibration:
Welcome to the Graco Control Application Menu
Build date: Sep 11 2002 08:36:59 (debug build)
a. Software Update and Version Information
b. View Log Files
c. Set Date and Time
d. Enter Calibration Information
e. Enter Pump Size
Enter Selection [a-e]: d
Enter new A calibration factor. Current A calibration factor: 91000
91007
Enter new B calibration factor. Current B calibration factor: 91000
91050
Calibration factor A = 91007. Calibration factor B = 91050.

Graco ProMix Easy Specifications

General

Brand	Graco
Model	ProMix Easy
Category	Industrial Equipment
Language	English