Rotor Assembly Replacement
310645F 23
Rotor Assembly Replacement
Use Pump Assembly Replacement Kit 287255.
Disassembly
First read and follow instructions in the Before
performing any service on sprayer section, page 10.
Then remove hopper, front and back covers, page 10.
Remove hose extension and RotoFlex HD Pump
assembly from frame, page 12.
1 To prevent rotor assembly
from moving, insert a long
screw driver or pry bar in the
pulley.
2 Remove large bolt and
washer in center of rotor
assembly.
3 Pull rotor assembly off
shaft.
Reassembly
1 Put new rotor assembly from kit on shaft.
2 Insert a wrench in the
pulley to prevent it
from moving..
3 Replace bolt. Torque to
40 ft. lbs.
4 Replace RotoFlex HD Pump and hose extension,
page 13.
5 Replace back and front covers and hopper. See
Removing and Replacing Hopper, Front and Back
Cover, page 10.
ti4714a
ti4711a
ti4714a
ti4712a
To Next Page
Loading...
