EasyManua.ls Logo

Graco RTX 1500 - Alternate Method for System Priming

Graco RTX 1500
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparation
310645F 9
Auxiliary Air Compressor
Use Auxiliary Air Hookup Kit 287328 when additional
atomization air is necessary.
Generators
7500 W (7.5 KW) minimum.
Tips for Using Generators
Before running sprayer, make sure it is at room tem-
perature. This will reduce startup current.
Run generator at full throttle.
Hose Lengths
The system comes with a twin line hose set consist-
ing of a 1 in. ID x 25 ft (25 mm x 7.6 m) material hose
and a 3/8 in. ID air hose. Additional hose sections can
be added. Total final length of hose used should not
exceed 100 feet in length.
CAUTION
Attaching auxiliary air to sprayer without using the
Auxiliary Air Hookup Kit will damage sprayer.
CAUTION
Sprayer air hose fitting can get hot! Allow sprayer to
cool down 5 minutes before removing air hose.

Other manuals for Graco RTX 1500

Related product manuals