Controls and C onnectio ns
Ref. Symbol
Description
CI
CJ
CK
Pump Air Suppl
y Ports (3 provided): Connect supply air to pump manifold (FF) ports.
Route hoses th
rough the hose block on the side of the frame. Use the three provided 109
inch hoses. Co
nnect the pump manifold (GG) ports to the pump air motors.
CL Check valve
pilot: Connect 3/8 in. tube to the pilot port (S1) on the pilot check valve (V6)
located on t
he side of the frame.
CM Cylinder bottom: Supply to the cylinder bottom. Connect 1/2 in. tube to the pilot check
valve, V6–IN (R1) located on the side of the frame.
CN Cylinder t
op: Supply to the cylinder top. Connects to the cylinder distribution manifold on
the cross
bar.
3A5416C 23
To Next Page
Loading...
