Electro-pneumatic Control Panel Display Screens
Specialty key definitions
Key Description
Exit
Exit the keybo
ard or keypad. If the entry has not been saved, any displayed entry shown in
the top field of
the keyboard or keypad is lost.
Backspace
Erase the last character of the displayed entry in the top field of the keyboard or keypad. This
key will erase one character each time it is pressed.
Enter
When the desired value has been entered in the top field of the keyboard or keypad, press
the Enter key to save the value in the selected field on the display screen. Press the Exit key
when done entering a field value.
Shift
The shift key is a toggle between upper and lower case letters or between the upper and
lower character shown on some keys. When pressed, the selected case is used on each
key selected until the Shift key is pressed again. Switching screens will reset the shift
to lowercase on the new screen.
Polarity
This key is currently not used.
Function Keys
Key Description
Run
Select
the run screens.
Recipes
Create or edit recipes.
Logs
View available logs.
Syst
em Settings
Con
figure the STU.
30 3A5416C
To Next Page
Loading...
