Graco SaniForce - Material Recipe Editing; Material Recipe Edit Screen Details

Electro-pneumatic Control Panel Display Screens
Material Recipe Edit Screen
When creating a new recipe from scratch, default
pressure settings will be pre-filled in. These
pressuresareofferedasgoodstartingpoints,
but most will have to be varied to obtain optimal
performance for the specific application.
The viscosit
y of the product being pumped will
require a dif
ferent mix of pressure settings. If differing
viscosities
of the same product are pumped, once a
recipe has be
en defined for one viscosity, that recipe
canbecopie
d and used as the template to define
arecipefor
the additional viscosity. This will allow
creation of
a new recipe without having to enter all
new values.
Only the values that must change will
need to be en
tered.
Icon/Field Description
Press to complete the fields of this recipe with the values assigned to another
recipe. After copying, individual fields can be modified to differentiate this recipe
from the one copied. The copied values will overwrite any defined values in this
recipe.
NOTE: Copying a locked recipe will also copy the password and this recipe will
also be saved as a locked recipe.
Recipe Name
User d
efined alphanumeric field, 19 characters maximum
Lock
When locked, the password defined on the System Settings page must be entered
to edit the selected recipe. During editing, clicking the lock box (
) will clear the
Recipe Locked box and a password will not be required to edit this recipe after it is
saved.
recipe not locked
recipe locked
Auto Raise
When checked, an automatic sequence will attempt to lift the ram plate out ofthe
container and raise the ram to the top of its travel. If not checked, the ram plate
will remain at the location where it is when an automatic sequence completes.
If batching is being used, and the tote is empty before the batch has completed,
the ram plate will auto raise so that another tote can be placed and the run button
pressed to resume the batch unload.
Container Recipe Select from the list of user-defined container recipes.
Default Batch Size Select a value that is indicative of the normal size of a batch of the product being
evacuated. The value can be larger than the contents of the container. In this
case, one or more container changes may be required to complete the batch.
38 3A5416C