Graco SnugRide Click Connect 30 User Manual

Name: Graco SnugRide Click Connect 30
Brand: Graco
Rating: 5 (1 reviews)

48 pages

To Next Page

To Previous Page

A. Push the harness adjustment button

under the seat flap. Pull the shoulder

straps out to loosen the harness

B. From behind seat, remove the ends

of the two shoulder straps from the

metal junction plate .

C. From front, pull straps through the

harness slots and then reinsert them

through the appropriate slots. Both

harness straps must be through the

same set of slots in the seat and pad.

D. Depending on the size of your child,

you may need to adjust the harness

straps as shown on page 37.

Reassemble the strap ends onto the metal

junction plate .

5. SAFETY CHECK:

a) CHECK that straps are not twisted in front

or back;

b) CHECK that straps are secure by pulling

on harness straps from the front of the seat.

Metal junction

plate



Harness adjustment

button

Questions and Answers:

Need help?

Do you have a question about the Graco SnugRide Click Connect 30 and is the answer not in the manual?

General