Graco SnugRide SnugLock 30 User Manual

3 Rear
Facing
26
3-B Install With Base
Rear-Facing With
UAS Strap
Review your vehicle owner’s manual for UAS
location and use.
1. Place Base in
Back Seat of the
Vehicle
Place the base flat
on the vehicle seat.
Push it back until
the front of the base
touches the vehicle
seat back. Center
the base between
the lower UAS
anchors.
If allowed by your
Vehicle Owner’s
Manual, the center
seating position
may be used if the
anchor spacing is
28 cm (11 in) or
greater.

Graco SnugRide SnugLock 30 Specifications

General

Weight Capacity	4-30 lbs
Height Capacity	Up to 30 inches
Harness Type	5-point harness
Compatibility	Compatible with Graco Click Connect strollers
Expiration	7 years from manufacture date
Installation	SnugLock Technology
Base	Includes SnugLock base
Safety Features	Side-impact tested