Graco SnugRide SnugLock 30 User Manual

3 Rear
Facing
31
12. Attach Car Seat
to Base
Place car seat into the
base. Push down on
the front of the car seat
and handle until you
hear a “click”.
Test to make sure the
car seat is attached by
pulling up on the front
corners of car seat.
11. Test For Tightness
Grab the sides of the
base at the belt path,
push and pull the base
from side to side and
front to back.
If the base moves less
than 2.5 cm (1 in), it is
tight enough.
CLICK!

Graco SnugRide SnugLock 30 Specifications

General

Weight Capacity	4-30 lbs
Height Capacity	Up to 30 inches
Harness Type	5-point harness
Compatibility	Compatible with Graco Click Connect strollers
Expiration	7 years from manufacture date
Installation	SnugLock Technology
Base	Includes SnugLock base
Safety Features	Side-impact tested