Graco SnugRide SnugLock 30 User Manual

3 Rear
Facing
34
3-C Install With Base
Rear-Facing With
Vehicle Seat Belt
1. Store UAS Strap
Open the storage door
and insert the UAS strap
as shown.
2. Place Base in Back
Seat of the Vehicle
Place the base flat on
the vehicle seat. Push
it back until the front of
the base touches the
vehicle seat back.
3. Open the
SnugLock™ Arm
Push in the release lever
and open the lock-off.

Graco SnugRide SnugLock 30 Specifications

General

Weight Capacity	4-30 lbs
Height Capacity	Up to 30 inches
Harness Type	5-point harness
Compatibility	Compatible with Graco Click Connect strollers
Expiration	7 years from manufacture date
Installation	SnugLock Technology
Base	Includes SnugLock base
Safety Features	Side-impact tested