Graco SnugRide SnugLock 30 - 3-D Install Without Base Rear-Facing With Vehicle Seat Belt

3 Rear
Facing
37
8. Close the
SnugLock™ Arm
Close the lock-off until
you hear a “click”.
Keep hands away from the lock-off area
when closing the lock-off.
9. Test For Tightness
Grab the sides of the
base where the seat
belt is and push and
pull the base from side
to side and front to
back.
If the base moves less
than 2.5 cm (1 in), it is
tight enough.
CLICK!