Graco Super nova 495 - Stored Data Access; Accessing Stored Data Mode; Data Point Navigation and Reset

Ultra/ST Max 395/495/595 Sprayers - Digital Display (Optional)
14 309665L
1 Turn power OFF. 2 While pressing display
button, turn power ON to
enter Stored Data mode.
3 Model number is
displayed and then Data
Point 1, power on time in
hours, is displayed.
ti2827a
ti2707a
ti2706a
4 Press display button to
display Data Point 2, motor
on time in hours.
5 Press display button to
display Data Point 3, last
error code. Press and hold
display button to erase last
error code.
6 Press display button to
display Data Point 4,
software revision.
7 Press display button again
to return to Data Point 1.
Tur n p ow e r
OFF to exit
Stored Data.
ti2824a
ti2707a