Startup
Cleaning a Clogged
Tip
lhl
FLUID
INJECTION
HAZARD
To
reduce the risk of serious injury,
Procedure warning on page
12
when-
follow the illustrated Pressure
Relief
ever you are instructed to relieve pressure.
1.
Clean the front of the tip frequently during the day's
operation. First, relieve pressure.
2.
If
the spray tip does clog, release the gun trigger, en-
gage the gun safety latch, and rotate the
RAC
IV
handle
180".
See
Fig.
5.
3.
Disengage the gun safety latch and trigger the gun
into a waste container. Engage the gun safety latch
again.
4. Return the handle to the original position, disen-
gage the gun safety latch, and resume spraying.
5.
If
the tip is still clogged, engage the gun safety latch,
shut
off
and unplug the sprayer, and open the pres-
sure drain valve to relieve pressure. Clean the spray
tip as shown on the
RAC
IV
package.
SHOWN IN SPRAYING
TIP GUARD HANDLE
POSITION
I
DISENGAGE SAFETY
TURN HANDLE
180'.
GUN TO CLEAR CLOG
LATCH AND TRIGGER
GUN SAFETY
LATCH
'SHOWN
ENGAGED
Fig. 5
0137
308-560
9
To Next Page
Loading...
