System Verification
312359R 53
Confirm Pump and Metering Test
The Confirm Pump and Metering Test screen displays
when the pump and metering test completes without
error. Depending on the system ratio and test modes,
the details of the screen can vary. See Appendix A, Test
Screens (page 86) for these variations. The information
here is for system ratio mode by volume and a test
volume which is standard for XM systems. The screen
displays the target volume of material dispensed into
each beaker from each metering pump. To determine if
the system is in ratio and have your test results entered
in the downloadable USB log files, enter the two
volumes.
To Next Page
Loading...
Need help?
General
