Pump Packages
Heavy Fluids Sprayer Packages
Packages include a hopper, no fluid filter, 3/4 in outlet
check valve, 3/4 in x 50 ft. (15 m) hose, 1/2 in x 25 ft
(7.6 m) whip and XHF spray gun with 429 tip
24X593 - 70:1
24X594 - 80:1
Note
Heavy-fluid materials vary and should be
tested with a qualified distributor. Material
should be pourable and self-leveling.
Pump Packages
Check your pump package ’s identification plate (ID),
attached to the black motor shroud, for the 6-digit part
number of your pump package. For example, Pump
Part Number
PL 45 C 2
represents the pump (
PL
),
pressure ratio (
45
:1), carbon steel construction (
C
),
and no built-in filter or air controls (
2
).
To order replacement parts, see Pump Package Parts.
Pressure Ratio Maximum Air WPR Maximum Fluid WPR
PL 45
95 psi (0.65 MPa, 6.5 bar)
4500 psi (31 MPa, 310 bar)
PL 70
100 psi (0.7 MPa, 7 bar) 7100 psi (48 MPa, 489 bar)
PL 80
88 psi (0.6 MPa, 6 b ar) 7250 p si (50 MP a, 500 b ar)
PL 95
76 psi (0.5 MPa, 5 bar) 7250 psi (50 MPa, 500 bar)
PL 45
C2
Third and Fourth Digit
Fifth Digit Sixth Digit
First and Second Digit
Pressure Ratio
(xx:1)
Lower Construction Built-in Filter
45
C Carbon Steel
1
✔
70 2 NA
80
PL
95
Approvals:
II 2 G c 230°C (T2)
8
334645
C
To Next Page
Loading...
