Graham Field LUMEX SELECT Series - Specifications; Mattress Overlay Specifications; Pump Specifications

LS300-INS-LAB-RevD19 17
9 SPECIFICATIONS
MATTRESS OVERLAY (Applied Part)
Model Description Specication
LS300M Dimensions (L x W x H) 80 in. x 36 in. x 8 in. (203.2 cm x 91.4 cm x 20.3 cm)
Weight 16.3 lb (7.4 kg)
Top Cover Material Navy Nylon coated with PU + Single Quilting
Base Cover Material Black polyester laminated with PVC, 4 corner elastic strap
PUMP (UL Listed)
Model Description Specication
LS300P Dimensions (L x W x H) 10.16 in. x 4.13 in. x 6.38 in. (25.8 cm x 10.5 cm x 16.2 cm)
Weight 4.85 lb (2.2 kg)
Cycle Time 10, 15 or 20 min.
Flow Rate (direct from pump) 6L / min. compressor
Pressure 16 ~ 32 (±6) mmHg 5 Pressure Level
Rated Voltage & Frequency AC 110-120V 60 Hz
Fuse Rating T1AL 250V
Maximum Current 0.1A
Power Cable 12.5 ft, non-shielding, AC powered
Classication (Electrical) Class II, Type BF
Not AP or AGP type
Temperature Operation 59°F ~ 104°F (15°C ~ 40°C)
Storage / Transport 41°F ~ 140°F (5°C ~ 60°C)
RH (Relative
Humidity)
Operation 30% ~ 75% non-condensing
Storage / Transport 15% ~ 90% non-condensing
Operation Atmospheric Pressure Range 700 hPa to 1060 hPa
Operation Altitude -1017 feet to 9,843 feet (-310 meters to 3000 meters)
Mode of Operation Continuous
Safety Standard IEC60601-1 / IEC60601-1-2 / IEC60601-1-11
Expected Service Life Three years
International Protection Rating /
Ingress Protection Rating
IP21 Protection against solids: 12.5mm; ngers or similar
objects
Protection against liquids: Dripping water (vertically falling
drops) shall have no harmful effect