LS300-INS-LAB-RevD19
3
1 INTRODUCTION
Congratulations on your purchase of the Lumex LS300 Alternating Pressure / Low Air Loss
Mattress System. This guide covers its use. The following pages will provide you with important
safety, setup and operating instructions as well as maintenance and warranty information. Read
this manual carefully before operating your Mattress System and refer to it as often as needed.
Consult your authorized distributor or healthcare professional with any questions or concerns
regarding safe and effective techniques for operating your Mattress System. This mattress system
is intended for homecare use ONLY.
INTENDED USE
The Lumex LS300 Alternating Pressure / Low Air Loss Mattress System is designed to aid in the
treatment and prevention of pressure ulcers while optimizing user comfort. The Mattress System
is intended for use by those who are at least fteen years in age.
Info: This device can be used in home healthcare and professional healthcare environments.
CONTRAINDICATIONS FOR USE
WARNING: Certain patient conditions, such as unstable fractures of vertebrae and
conditions of the vertebrae, are not suitable for using this type of device. Always consult a
physician or health professional before using this device.
WARNING: The Mattress System has a minimum weight capacity of 88 lb (40 kg) and
maximum weight capacity of 450 lb (205 kg), EVENLY DISTRIBUTED.
SYMBOL DEFINITION
Symbol Meaning
Type BF Protection against
electronic shock
Refer to Instruction Manual /
Booklet
Caution, consult accompanying
documents
Keep dry
Symbol Meaning
Class II equipment
Waste disposal
Alternating current
SGS product certication mark
To Next Page
Loading...
Need help?
General
