Why is the pump not functioning on my Graham Field LUMEX SELECT?
If the pump of your Graham Field Indoor Furnishing isn't working, the issue might stem from the power cord or voltage; using a power regulator could resolve this. Alternatively, a faulty fuse could be the culprit; in that case, replace the fuse.
What to do if some air cells are not properly inflated in Graham Field Indoor Furnishing?
If some air cells in your Graham Field Indoor Furnishing aren't inflating correctly, check for a kinked connection between the air cells and the manifold and correct any kinking. Also, check for leakage from the air cells; if there's a leak, replace the faulty air cell.
General| Brand | Graham Field |
|---|---|
| Model | LUMEX SELECT Series |
| Category | Indoor Furnishing |
| Language | English |
Defines the system's purpose and target user age.
Lists conditions where the system should not be used.
Explains symbols used in the manual and on the device.
Explains the meaning of DANGER, WARNING, CAUTION, NOTICE, and INFO statements.
Specific DANGER warnings related to electrical hazards.
General WARNINGs for fire, electrical, and personal injury risks.
Describes the overall system technology and function.
Lists key features of the pump unit.
Lists key features of the mattress overlay.
Steps for safely removing the system from packaging.
Guidelines for storing the pump and mattress.
Information on environmentally responsible disposal of the product.
Instructions for placing and securing the mattress on the bed frame.
Steps for connecting and positioning the pump unit.
Recommendations for maintaining patient skin health.
Advice for managing incontinence with the system.
Explains the use of the pump's power, auto firm, and time buttons.
How to set and use the static mode.
How to set and use the alternating pressure modes.
Explanation of the low pressure alarm and its muting.
How to enable and disable the control panel lockout feature.
Procedure for rapid deflation of the mattress.
General guidelines for cleaning and disinfection procedures.
Detailed instructions for cleaning the mattress and its cover.
Specific instructions for cleaning the pump unit.
Procedures to verify system functionality before patient use.
Instructions for replacing the air filter in the pump.
Technical specifications for the mattress overlay.
Technical specifications for the pump unit.
Outlines what the warranty covers and for how long.
How to contact GF for warranty claims and service.
Lists items/conditions not covered by the warranty.
Legal disclaimer and limitations of GF's liability.
Declares the device's electromagnetic emission compliance.
Guidance on maintaining safe distances from RF devices.
Details immunity test levels and compliance for various disturbances.
Specifies immunity tests for RF wireless communications equipment.
Test specifications for enclosure port immunity to RF wireless communications equipment.
To Next Page
