14
PIECES COUNTING FUNCTION
The pieces counting function is used to count the number of pieces deposited
on the pan.
1. Place a container on the pan and press the
key.
2. Insert a certain number of pieces (10, 20, 50 or 100) into the container.
This number of pieces is the initial sample, the higher number grants
more accuracy in final counting.
3. Press the
key, select the desired sample number using the , ,
, or keys. To confirm the selected value, press the key.
4. The balance will accept the sample and after a few minutes will indicate
the pieces counting mode.
5. The display will show the number of pieces placed on the pan, add the
rest of pieces to obtain the total of pieces.
6. To count other pieces of a different weight unit, repeat the procedure.
7. To return to normal weighing mode, press the
key until the sign
grams “g” appears on the right side.
PERCENTAGES FUNCTION (%)
1. Once selected the percentage mode by pressing the key, use the
keys or , to choose between 100.0% or 100.00%.
2. Place the product, considered as 100%, on the pan and press the
key. The symbol “Modo” will flash for a few seconds and then the balance
will beep indicating the procedure is finished.
To Next Page
Loading...
Need help?
General
