Need help?Do you have a question about the Gram CM-3 and is the answer not in the manual?
Details power input, output, consumption, and battery life.
Explains how to view the scale's version and describes the LCD display layout.
Illustrates the scale's keypad layout.
Details the function of each key on the scale.
Instructions for setting and clearing preset Tare values on the scale.
Procedures for setting high and low weight limits.
Configuration of the check-weighing function.
Instructions for accumulating and displaying total weights.
Steps for entering sample quantity and activating piece counting mode.
Overview of standard calibration procedures including zero and span.
Procedure for performing weight calibration (zero and span).
Steps for zero calibration and span calibration.
Configuration for check weighing parameters including LO/HI limits.
Setting the auto power-off timer duration.
Configuration options for display backlight modes.
Configuration for the HOLD function modes.
Configuration for RS-232 output format and baud rate.
Setting the zero weight display sensitivity.
Procedure for gravitational calibration to improve accuracy.
To Next Page
General
