Gram CM-3 - Weighing Operations; Check-Weighing Function Configuration; Weights Accumulation

8
CHECK-WEIGHING FUNCTION CONFIGURATION
o 0 0 0
A B C
A: Acoustic signal.
Option 0=stability is not required
Option 1= stability is required
B: LCD indicator and Relay activated
Option 0=stability is not required
Option 1= stability is required
C: Acoustic signal conditions
Option 0=acoustic signal deactivated
Option 1=OK
Option 2= LO and HI
1. Press the key.
2. Use the numeric keys 0, 1 and 2 to select the required function (A, B, C)
3. Press the key to confirm.
4. The scale will return to normal weighing mode automatically.
WEIGHTS ACCUMULATION
1. Place the product onto the scale and press the key.
2. During 2 seconds the screen will display the number of weights carried out (1).
3. During 2 seconds the screen will display the total accumulated weight and the M+
symbol.
4. Place another product onto the scale and press the key.
5. During 2 seconds the screen will display the number of weights carried out (2).
6. During 2 seconds the screen will display the total accumulated weight and the M+
symbol.
7. Repeat the process as many times as it is necessary.
HOW TO DISPLAY TOTAL ACCUMULATED WEIGHT
1. Press the key.
2. During 2 seconds the screen will display the number of total weights carried out.
3. During 2 seconds the screen will display the total accumulated weight.