KEYBOARD DESCRIPTION
KEY FUNCTIONS DESCRIPTION
To turn off the scale, press and hold the OFF key and the display will show
“Off” for 2 seconds.
Press the key to turn on the scale.
Function 1. To select desired weighing unit.
Function 2. To escape (exit) setting in setup mode.
Function 1. To reset the weight to 0, but the displayed weight value has
to be less than
±
2% of maximum capacity.
Function 2. To move one space to the left or downward in setup mode
Function 1. To subtract the container weight.
Function 2. To move one space to the right or upward in setup mode.
Function 1. To see gross and net weight when the scale is on tare status.
All other keys will be disabled when gross weight is activated
Function 2. To increase values upward in setup mode.
Function 1. To select internal backlight mode of the display.
Function 2. Works as numeric number 2 in setup mode.
Function 1. Manual transmitting data through RS-232 to computer or
To Next Page
Loading...
