12
Changing the door hinge over to the opposite side
Illustrations 19-26 below and over the page, show how easy it is to
change the doors from right-hinged to left-hinged, or vice versa.
(Changing the door from left to right is done in the same way, but
opposite).
Top and bottom left hand hinges and accessories are supplied in
the parts kit.
*The fridge/freezer must be switched off and emptied completely.
- Remove the 2 screws in the hinge top on the right-hand side of
the cabinet. (19)
- Lift the refrigerator door slightly and take the door and upper
hinge off by pulling the door towards you.
- Remove the dummy hinge from the opposite side by unscrewing
the 2 screws. (20)
- Reverse the dummy hinge and refit it on the opposite side of the
cabinet using 2 screws.
- Remove the lower door by unscrewing the 2 screws in the
centre hinge. (21)
- Refit the 2 screws from the left-hand side on the right-hand side.
(22)
- Lift the lower door and the centre hinge up and take them off.
- Tilt the refrigerator to an angle of max. 45º and unscrew the
bottom hinge. This is done by removing the 2 screws holding the
bottom hinge on the cabinet underside. (23)
- Remove the bottom dummy hinge in the opposite side in the
same way as the upper dummy hinge was removed. (24)
- Reverse the dummy hinge and refit it on the opposite side of the
cabinet.
- Reverse the upper right-hand hinge and refit it in the lower
left-hand corner of the cabinet.
- Place the cabinet in the vertical position again.
- Remove the door handles by removing the screws. (25)
To Next Page
Loading...
Need help?
General
