IMPORTANT INFORMATION
The fridge/freezer contains the environment-friendly, non-ozone
depleting refrigerant R600a. As R600a is a flammable gas, it is
important to avoid damage to the refrigeration circuit during
transport and installation. If the refrigeration circuit is damaged,
avoid using naked flame in the vicinity of the fridge/freezer and
connecting power to fridge/freezer. Also make sure that there is
good ventilation in the room. If you are in doubt, please contact
your supplier.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
WARNING: Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recommended
by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are recommended by
the manufacturer.
Transporting and moving the fridge/freezer
The fridge/freezer must always be moved in the vertical position.
The cabinet must not be tilted more than approx 40º. If the fridge/
freezer has been tilted more than 40º, the power supply must not
be connected until the appliance has stood upright for at least 2
hours.
5
To Next Page
Loading...
Need help?
General
