DP760 DECT REPEATER DISSOCIATION FROM DP752
To disconnect DP760 DECT Repeater from the Base Station DP752, please refer to following options:
Using DP760 Web GUI
To disconnect your DP760 DECT Repeater via Web GUI, please refer to following steps:
1. Access the Web GUI of your DP760 using the admin’s username and password.
2. Enter the administrator’s username and password to access the Web Configuration Menu.
3. Navigate to Status → DECT Status → Global Functions and press Disconnect.
4. The DP760 DECT Repeater will be automatically disconnected from the DP752 and it will start again
scanning for available RFPs.
Figure 45: DECT Repeater Status on DP752
Using Page Button
Long press on page button on the back panel of DP760 for 7 seconds, it will remove the association values
of the previous base station.