5. Go to DECT →SIP Account Settings
6. Configure your SIP details in desired account:
a. Account: Select Account row to configure (Account 1 – Account 10).
b. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually
in the form of digit similar to phone number or actually a phone number.
c. Authenticate ID: SIP service subscriber’s Authenticate ID used for authentication. Can be
identical to or different from SIP User ID.
d. Password: SIP service subscriber’s account password to register to SIP server of ITSP.
For security reasons, the password will field will be shown as empty.
e. Name: Any name to identify this specific user.
f. Profile: Select the corresponding Profile ID (1/2/3/4).
g. HS Mode: Assign the account to specific Handsets (HS1, HS2…) or hunting group mode.
h. Active: Set to Yes. If set to No, account is disabled and will not register.
7. Press Save and Apply to save your configuration.
After applying your configuration, your phone will register to your SIP Server.
You can verify if your DECT phone has registered with your SIP server from your DP752 web interface
under Status → Account Status (a green background with Yes under SIP Registration column for
corresponding account indicates the account(s) has been successfully registered).
To Next Page
Loading...
Need help?
General
