Grandstream Networks DP722 Administration Guide

P a g e | 26
DP752/DP730/DP722 Administration Guide
Version 1.0.11.4
Figure 5: Setting up the DP730/DP722
Battery Information
Table 10: DP722/DP730 Battery Specifications
In order to get the best performance of your DP730/DP722 Handsets, we recommend using original
batteries provided in the package or batteries compliant with above specifications.
The specifications may differ depending on the age and capacity of the batteries used.
Important Note: Be careful when inserting the batteries into your handset to avoid any risk of short-circuit,
which lead to damage your batteries and/or the handset itself. Do not use damaged batteries which can
increase the risk of serious harm.
Setting up the Charge Station
Please refer to the following steps for setting up the charge station and charging the Handsets:
1. Connect the DC plug on the power adapter to the micro-USB connector on the charge station.
2. Connect the other end of the power adapter into an electrical power outlet.
3. After setting up the Handsets and the charge station, place the Handsets in the charge station.
DP722 Batteries Specifications
DP730 battery specifications
• Technology: Nickel Metal Hydride (Ni-MH)
• Size: AAA
• Voltage: 1.2V
• Capacity: 800mAh
• Charging time: 12 hours from empty to full
• Standby time: up to 250 hours
• Talk time: up to 20 hours’ active talk time
• Technology: Li-ion
• Nominal Voltage: 3.8V
• Capacity: 1500mAh
• Charging time: 12 hours from empty to full
• Standby time: up to 500 hours
• Talk time: up to 40 hours’ active talk time
4
2
6
1. Battery compartment cover of DP730
2.
Battery
3.
Rear of DP730
4.
Battery compartment cover of DP722
5.
AAA Batteries
6.
Rear of handset
5
1
3

Grandstream Networks DP722 Specifications

General

Brand	Grandstream Networks
Model	DP722
Category	IP Phone
Language	English