EasyManuals Logo

Grandstream Networks DP750 Administration Guide

Grandstream Networks DP750
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
P a g e | 65
DP750/DP720 Administration Guide
Version 1.0.11.4
Handset Config
File Prefix
If configured, only the handset configuration file with the matching encrypted prefix
will be downloaded and flashed into the device.
Handset Config
File Postfix
If configured, only the handset configuration file with the matching encrypted
postfix will be downloaded and flashed into the device.
Allow DHCP
Option 43 and
Option 66 to
Override Server
Obtains configuration and upgrade server’s information from DHCP server using
options 66 and 43.
Note: If DHCP Option 66 is enabled, the DP750 will attempt downloading the
firmware file from the server URL provided by DHCP, even though Config Server
Path is left blank.
Allow DHCP
Option 120 to
Override SIP
Server
Obtains configuration and update SIP server information from DHCP server using
options 120.
Note: If DHCP option 120 is enabled, the sip server setting can be changed for
profile 1.
3CX Auto Provision
Sends multicast “SUBSCRIBE” message for provisioning at booting stage, used
for PnP (Plug-and-Play) configuration. Default is Yes.
Automatic
Provisioning
Specifies when provisioning process will be initiated; there are 4 options:
No: Base station will only request configuration files once at boot up.
Check every X minutes: User needs to specify a period in minutes.
Check every day: User needs to specify “Hour of the day (0-23)”.
Check every week: User needs to specify “Hour of the day (0-23)” and
“Day of the week (0-6)”. Note: Day of week is starting from Sunday.
Default is No.
Hour of the Day
(0-23)
Defines the hour of the day to check the HTTP/TFTP server for configuration file
changes. Default is 1.
Day of the Week
(0-6)
Defines the day of the week to check HTTP/TFTP server for configuration file
changes. Default is 1.
Authenticate Conf
File
Authenticates configuration file before being accepted. This protects the device
configuration from unauthorized modifications. Default is No.
Upload Device
Config
Uploads manually device configuration (XML and TXT formats are supported) to
base station.

Table of Contents

Other manuals for Grandstream Networks DP750

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks DP750 and is the answer not in the manual?

Grandstream Networks DP750 Specifications

General IconGeneral
BrandGrandstream Networks
ModelDP750
CategoryIP Phone
LanguageEnglish

Related product manuals